Enterococci and E. coli: How Sea Water Quality Is Measured and What the Blue Flag Requires
When people talk about "clean sea water", they are technically talking about two microorganisms: intestinal enterococci and Escherichia coli (E. coli). These are the two microbiological parameters behind the official classification of bathing waters, the verdicts of independent monitoring such as Legambiente's Goletta Verde, and the water quality requirement for the Blue Flag. This guide explains what they measure, what the thresholds are and how to read the results without confusing single samples with seasonal classifications. The values cited come from the European and Italian reference framework (Bathing Water Directive 2006/7/EC, Italian Legislative Decree 116/2008, Ministerial Decree of 30 March 2010).
What are intestinal enterococci and E. coli, and why are they measured?
Intestinal enterococci and E. coli live in the gut of humans and warm-blooded animals. They are not necessarily the only risk for swimmers, but they are indicators of faecal contamination: high counts suggest that wastewater may have reached the sea, whether from underperforming treatment plants, illegal discharges, or river and canal outlets after heavy rain. The EU Bathing Water Directive 2006/7/EC, transposed in Italy by Legislative Decree 116/2008, makes these two parameters mandatory for monitoring bathing waters. Results are expressed in colony-forming units (CFU) or most probable number (MPN) per 100 millilitres of water.
Legal thresholds and the four quality classes
The Ministerial Decree of 30 March 2010 sets the values used to classify bathing waters. For coastal and transitional waters, the limits for the Excellent class are 100 CFU/100 ml for intestinal enterococci and 250 CFU/100 ml for E. coli, calculated at the 95th percentile. For Good, the values are 200 and 500, again at the 95th percentile. For Sufficient, they are 185 and 500 at the 90th percentile. Anything above these thresholds is classed as Poor. A percentile is a statistical calculation across a series of samples, not the result of a single test: a bathing area's classification normally draws on the last four years of data. Inland waters have different, higher values, because the rules treat the two settings separately.
How official sampling and checks work
Samples are taken by the regional environmental protection agencies (ARPA and APPA), part of Italy's national environmental protection system (SNPA), following the regional calendar. The rules require one sample shortly before the bathing season starts and then at intervals of no more than one month, with a minimum of four samples per season. Analyses follow standardised methods: ISO 9308-1 for E. coli and ISO 7899-2 for enterococci. Results feed into the national system run by the Ministry of Health and into annual bathing water quality reports. If a single sample exceeds the limits (200 CFU/100 ml for enterococci, 500 for E. coli at sea), it triggers further checks, new sampling and, if needed, temporary swimming bans.
Goletta Verde: independent monitoring, different logic
Goletta Verde, Legambiente's coastal survey campaign, takes spot samples along the coast, often at river mouths and other trouble spots, and has them analysed for the same microbiological parameters, using the legal bathing limits. Its reports sort results into categories: within limits, polluted when values exceed the limits, and heavily polluted when they exceed them by more than double. The method differs from the official one: a single-day sample is not the same as a classification built on multi-year series, and it does not replace the ARPA checks. To read a headline like "X out of Y sampling points polluted" correctly, look at where the points were chosen: the campaign focuses on higher-risk areas and is not a statistical sample of the coastline.
What the Blue Flag requires for water quality
In Italy the Blue Flag is awarded by FEE Italia, the national operator of the Foundation for Environmental Education. One of its criteria is bathing water quality: the municipality must have waters classified as Excellent under current legislation, with sampling carried out by the competent authorities, alongside requirements on wastewater treatment and the environmental management of the resort. In practice, enterococci and E. coli are the technical basis of the requirement, since the Excellent class is derived from exactly the values described above. The Blue Flag also assesses other aspects, such as environmental education, waste management, services and safety. For the current year's rules, always check the criteria published by FEE Italia.
Frequently asked questions
What are the enterococci and E. coli limits that trigger a swimming ban at sea?
For marine and coastal waters, a single sample is over the limit if it exceeds 200 CFU/100 ml for intestinal enterococci or 500 CFU/100 ml for E. coli (Italian Ministerial Decree of 30 March 2010). The local authority then considers a temporary swimming ban and orders new samples.
Does a failed Goletta Verde sample mean a beach's Blue Flag is invalid?
Not automatically. Goletta Verde captures one spot on one day, while the official classification and the Blue Flag rely on the health and environmental authorities' checks and on multi-year data series. Still, the Legambiente result is a useful warning sign, for example near a river mouth or a discharge point.
Why are enterococci and E. coli the parameters that get measured?
They are indicators of faecal contamination: their presence signals that sewage may be reaching the water, even if other pathogens haven't been tested for. Measuring them is faster and easier to standardise than screening for each individual pathogen.
Sources: 2026 Blue Flag beach list (FEE) · Italian Ministry of Tourism · © OpenStreetMap contributors (ODbL). Data is provided for informational purposes — always check official sources before visiting.